HELP !! No start condition...
#1
HELP !! No start condition...
I don't know what the heck is going on..The truck will not turn over..It is not a voltage issue..Batt is good..I'm not getting voltage to the starter..No codes either..I turn the key can hear the fuel pump prime then nothing..It's like there is a relay not sending a signal to the solinoind or something..I can pop start the truck and it runs fine like that..
I'm wondering if it's the clutch safety switch...Also this is intermitten..I can go outside and it will start..Then if I shut it off it probably won't again..Totally on a whim..Very annoying..Anyone have an idea of a way to trouble shoot this problem?!?!?!?!
Thanks for any help..
I'm wondering if it's the clutch safety switch...Also this is intermitten..I can go outside and it will start..Then if I shut it off it probably won't again..Totally on a whim..Very annoying..Anyone have an idea of a way to trouble shoot this problem?!?!?!?!
Thanks for any help..
#6
Originally Posted by 02-BLACK-EDGE
Seems to be a relay...I jiggled the starter relay in the engine bay and it works fine now..Must be on it's way out..Going get a new one..
#11
No current going from distributor to coil even though distributer pulse and coil good
My husband have a 1988 Ford Ranger it was running he drove it and parked in the garage but didn't drive for some months now it will not start ,the problem he realise is that no current coming from the distributer to the coil ,the distributer is working ,coil and all but just not getting the distributer to send current to the coil ,what could be the reason .
NB it's a 88 2.9 V6 fuel injector Ranger truck
#12
No current going from distributor to coil even though distributer pulse and coil good
My husband have a 1988 Ford Ranger it was running he drove it and parked in the garage but didn't drive for some months now it will not start ,the problem he realise is that no current coming from the distributer to the coil ,the distributer is working ,coil and all but just not getting the distributer to send current to the coil ,what could be the reason .
NB it's a 88 2.9 V6 fuel injector Ranger truck
#13
No current going from distributor to coil even though distributer pulse and coil good
My husband have a 1988 Ford Ranger it was running he drove it and parked in the garage but didn't drive for some months now it will not start ,the problem he realise is that no current coming from the distributer to the coil ,the distributer is working ,coil and all but just not getting the distributer to send current to the coil ,what could be the reason .
NB it's a 88 2.9 V6 fuel injector Ranger truck
Thread
Thread Starter
Forum
Replies
Last Post
89-2wd-2.9l
2.9L & 3.0L V6 Tech
1
06-27-2015 01:46 PM
Checking Interest: Superlift Shocks (perfect condition) CA
08XLT4x4
OLD - Suspension, Tires, & Wheels
4
10-17-2009 08:06 PM
Prerunner-Ranger
Drivetrain Tech
12
03-12-2008 03:45 PM