My 2007 ford ranger level 2 fx4 is stuck in 4 lo and its taking a while for the part to come. Is there anyway i can manually move it back to 2 wheel drive?

 

Welcome to the forum

There are only 2 parts in a 2007, 4x4 module and shift motor, both available at wrecking yards.

Any way yes, you can shift it out of 4low manually

Look here: How to: Rebuild 4X4 Shift Motor | Ford Explorer and Ford Ranger Forums - Serious Explorations

4th picture down shows transfer case shift rod pointed at 2H, thats 2WD, yours will be pointed at 4L, 4low
You need to remove the shift motor and use a pair of pliers to rotate the shift rod CLOCKWISE back to 2H

BUT........!!!!!!!!!!!!, there can be NO WEIGHT/TORQUE on the drive lines, so block a wheel, or be on LEVEL GROUND
Between 4L and 4H is NEUTRAL, it is not marked but it is there, directly across from 2H
So when you rotate shift rod it will go to Neutral and if tire is not blocked truck WILL roll away, with you under it.

 

Your idea worked ranger is back in 2 drive I can drive it regularly thanks!

 

Good work

Thanks for the update