Automatic Step Bars for Rangers?
#1
Join Date: Jun 2004
Location: LA, CA
Posts: 2,575
Likes: 0
Received 0 Likes
on
0 Posts
Automatic Step Bars for Rangers?
So... I gave up on trying to find a rear EDGE 2-dr stepbar bracket. SO.... i'm just gonna buy a new set. My question is, are there any steps out there that is like an automatic flip-down step that will fit a ranger? I've googled it and all I've found were for full sized trucks.
If anyone has any input or recommendations, let me know!
Again, I want the flip-down models (it can be a full step bar, or just a little step that flips down).
Thanks in advance!
If anyone has any input or recommendations, let me know!
Again, I want the flip-down models (it can be a full step bar, or just a little step that flips down).
Thanks in advance!
#2
have you tried a junk yard, or even the dealer? the dealer sent me my 2 dr brackets free of charge. all i did was email them, i said i bought these bars but it didnt come with brackets what can i do?
and 2 weeks later i had the 2dr brackets =D
its actually a ford ranger extended cab two door rear bracket.
xlt and ranger = same
and 2 weeks later i had the 2dr brackets =D
its actually a ford ranger extended cab two door rear bracket.
xlt and ranger = same
#4
Join Date: Jun 2004
Location: LA, CA
Posts: 2,575
Likes: 0
Received 0 Likes
on
0 Posts
Originally Posted by RangerJustin
Larson are you still just looking for the brackets? when i went to my junkyard they had a 2 door there...i dont recall if they had the brackets or not...but i could go check if you still are interested... ( i would have said something before...but i just remembered)
#5
Stylin' Concepts www.stylinconcepts.com sells the sidewinder steps that swing out when you open the door. I think they're about 350 or so for the set. Then you have the Amp Research (??) Full length steps that swing down when you open the door, and they will run about 1g if they even make them for a Ranger.
#7
Join Date: Jun 2004
Location: LA, CA
Posts: 2,575
Likes: 0
Received 0 Likes
on
0 Posts
#8
Member
iTrader: (1)
Join Date: May 2004
Location: Thibodaux, La
Posts: 176
Likes: 0
Received 0 Likes
on
0 Posts
the 06 XLT stepps i just bought from (skinsfan) bolted directly to my edge, so the brackets from either WILL work..
this is bars but with the 4 door bracket/the only other style ford sells.
http://cgi.ebay.com/ebaymotors/Nerf-...55604329QQrdZ1
this is bars but with the 4 door bracket/the only other style ford sells.
http://cgi.ebay.com/ebaymotors/Nerf-...55604329QQrdZ1
Thread
Thread Starter
Forum
Replies
Last Post
Jay524
OLD - Interior, Exterior, Electrical, & Misc.
15
06-09-2014 08:17 PM
BILTRITE BULLIES
OLD - Suspension, Tires, & Wheels
31
07-03-2010 08:50 PM