Bed bolt sizes?
#1
Bed bolt sizes?
Gonna pull it off to replace the fuel pump and I can't wait around for an order to come in so I'm just gonna go to Home Depot or Fastenal. What are the bolt sizes I'm looking for, and what would work to replace the clips in case they break? I'm not going to be doing any serious hauling save an errant motorcycle from time to time so a hardware store's hard wares will suit fine. I found the sizes once but lost the page and can't remember the steps I took to get there.
#5
Join Date: Apr 2007
Location: Placentia, CA
Posts: 927
Likes: 0
Received 0 Likes
on
0 Posts
Whoa Rezigrene, no need for the hostility. Don't use plastidip and respect the E4 and everything will be good! Anyways, here is what you asked for.
2 Closest to the cab: 12m x 1.75 x 120 mm
Other 4: 12m x 1.75 x 100mm
The stock bolts are a T55 torx. Make sure you soak them in PB Blaster and get a good torx wrench because it is easy to strip.
2 Closest to the cab: 12m x 1.75 x 120 mm
Other 4: 12m x 1.75 x 100mm
The stock bolts are a T55 torx. Make sure you soak them in PB Blaster and get a good torx wrench because it is easy to strip.
#6
Whoa Rezigrene, no need for the hostility. Don't use plastidip and respect the E4 and everything will be good! Anyways, here is what you asked for.
2 Closest to the cab: 12m x 1.75 x 120 mm
Other 4: 12m x 1.75 x 100mm
The stock bolts are a T55 torx. Make sure you soak them in PB Blaster and get a good torx wrench because it is easy to strip.
2 Closest to the cab: 12m x 1.75 x 120 mm
Other 4: 12m x 1.75 x 100mm
The stock bolts are a T55 torx. Make sure you soak them in PB Blaster and get a good torx wrench because it is easy to strip.
And stop the bickering, haha.
Thread
Thread Starter
Forum
Replies
Last Post
rangerstepside
Exterior Semi-Tech
15
02-24-2017 04:53 PM