Fog light question?
#1
Fog light question?
I have a 1993 Ranger Splash 2wd and I ordered the fog light valance and the new fog lights. I looked under my truck and it has the original connections for fog lights but mine didn't come with the truck so I have no switch. I have wired fogs before but that was just wiring to a toggle switch so how will this work and were do the wires go from the connection because I can really trace it. Thanks Martin
#2
Mine was the same deal, didn't have stock foglights but I put em on.
I didn't use the original connectors like ur talking about, but there is a connector for a switch behind the dash where the factory foglight switch is. just underneath the headlight ****
if you pull the dash out a little bit on that side you'll probably see it
if you feel like obtaining a stock switch and pluggin it in then more power to ya, but I never tried it on mine to even see if it'd work.
I didn't use the original connectors like ur talking about, but there is a connector for a switch behind the dash where the factory foglight switch is. just underneath the headlight ****
if you pull the dash out a little bit on that side you'll probably see it
if you feel like obtaining a stock switch and pluggin it in then more power to ya, but I never tried it on mine to even see if it'd work.
#4
Honestly, I think it's pot luck with the older trucks. I knew a guy with a 93, and all his wiring was there. All he had to do was plug in the lights, switch, and relay. Another friend had a 94 and he only had the wiring from the relay box to the dash. I had a 94, and only had the wiring from the bumper to the relay box.
Thread
Thread Starter
Forum
Replies
Last Post
MugenCRX04
OLD - Interior, Exterior, Electrical, & Misc.
13
03-28-2011 04:41 PM
Ranger_Envy
General Technical & Electrical
3
07-27-2009 09:05 PM
melj2000
General Technical & Electrical
2
09-28-2007 11:12 AM
Topper_Harlee
General Technical & Electrical
4
08-12-2005 03:42 PM