Is my BCM bad?
Thread Starter
|
Member
Joined: Jan 2020
Posts: 4
Likes: 0
From: Highland, IL
Is my BCM bad?
I started my ranger up one day and the power windows, power locks, low beams, and illumination board don’t work. Also the traction control, door open, and tpms lights are all on. Btw I have checked all the fuses
Unfortunately you may have to get a Ford Dealer to check the Smart Junction Box(SJB), thats the Body Computer, it operates all those devices
SJB is behind the passenger kick panel, fuse box is part of the SJB, you can pull the panel off and see if there is any moisture there
SJB is behind the passenger kick panel, fuse box is part of the SJB, you can pull the panel off and see if there is any moisture there
Thread Starter
|
Member
Joined: Jan 2020
Posts: 4
Likes: 0
From: Highland, IL
Yeah I’m taking it in soon
I was going to take into a local ford dealer but for some reason they said the closest they could do was 2 weeks so I’m taking it to an equally capable shop in town.
Last edited by Nitepaladin; Jan 30, 2020 at 09:03 PM. Reason: Errors
There is a cab fuse box behind a panel in the passenger kick panel, seen here: https://www.ranger-forums.com/attach...ps181c74ca.jpg
You can get your owners manual here: https://www.ranger-forums.com/genera...1-models-3747/
You can get your owners manual here: https://www.ranger-forums.com/genera...1-models-3747/
Thread
Thread Starter
Forum
Replies
Last Post
