Post ranger on front page miss
#1
#5
Here is a shot of it before I installed the 7 inch hal's on the roll bar
#6
#7
The light bar is a custom low profile one I made from a jeep luggage rack/stainless steel, it is adjustable the full length of the top of the cab, meaning I can slide is way far back or way to the front.
Here is a shot of it before I installed the 7 inch hal's on the roll bar
Here is a shot of it before I installed the 7 inch hal's on the roll bar
#8
I live about 20 miles from Topeka Kansas and will be having this shop http://www.expertoffroad.com/ do ALL of the work.
#9
The whole thing once done was about 60 bucks.It was easy to install I would say running the wire thru the roof into the head liner and down the door jam was the hardest but it is completely un-seen and runs to a red LED switch I drilled in my dash.
#11
Thread
Thread Starter
Forum
Replies
Last Post