Quick Help?
#1
Quick Help?
If I were to replace the rear-end in my 5 speed 98 Ranger with a rear end out of a 2002 Ranger with Automatic transmission is there any gear difference or is it possible to keep my fourwheeldrive. The 2002 is a 4.0 and mine is a 3.0 I would greatly appreciate any advice. Thank you so much.
-Jeremy
-Jeremy
#2
Post the digits off the tag on both rear's cover. It should be held on by one of the cover bolts.
Go here: http://www.therangerstation.com/tech_library/Axles.html
Go here: http://www.therangerstation.com/tech_library/Axles.html
#3
or you can look on the "Vehicle Certification Sticker" inside the drivers door.......
then look here:
https://www.ranger-forums.com/forum2...ad.php?t=37149
you MUST keep the front and rear gears the same ratio for your 4wd to work properly....
then look here:
https://www.ranger-forums.com/forum2...ad.php?t=37149
you MUST keep the front and rear gears the same ratio for your 4wd to work properly....
Thread
Thread Starter
Forum
Replies
Last Post
93rangerXLT4x4
Auto Detailing 101
15
11-28-2009 09:24 PM
helliboarder
General Ford Ranger Discussion
2
10-03-2004 10:13 PM
W1CKY
Wheels & Tires Semi-Tech
6
06-08-2004 06:08 AM