and worked out good
http://ecx.images-amazon.com/images/I/513X0D1JWQL.jpg

 

lurk moar

 

^really

i was just asking if anyones has or hasn't ,
simple yes or no wouldn't be that hard

 

I used this on the lower 3rd of the jeep I used to have. Worked excellent, used to scrape up my hands when I brushed by the truck. When you scuff the surface use 80 grit or something similar, not a scotch brite pad. When I scuffed the surface I did it by hand, not with a sander. Stir it up real well, get the UV additive to add in and make sure you buy 1 or 2 extra rollers. The UV additive will keep it glossy, or else it will fade out to a real crappy flat black. You can also use paint over it. I didnt use the UV, so I touched up with Rustoleum gloss black, but I would use the UV additive if I had to do it all over again.

 

Ya man I used it in my bed....I think it looks awesome works well also

 

i want to try it in my bed first then do the sides

 

grant had a point.... theres a lot of people on here that has used it... if you would have used the search you woulda found somthing really quick.

 

I just used that last weekend to do the bed of my truck. It turned out really well. I used 60 grit sand paper to rough up the paint.