Well I went to ford to get the truck work on...
#1
Well I went to ford to get the Ranger worked on...
Before the warranty ends.(Bumper to Bumper) I call them two days later because it a siht load of stuff to fix. And they said I need to talk to the manger about the mod on the truck... I have no idea what the manger going to say...
Well here is my list I made them to look at...
1) Driveshaft makes noise when backing up or you can feel the slack or jerk when you take off.
2) Starter makes noise when started at cold starts or when it not hot.
3) Radio bezel is peeling
4) Center console laid is cracked.
5) Driverside power lock quit workin, will not unlock.
6) Sliding rear window makes noise when drivin. ( Would like to get a single window)
7) Driverside brake pad is tight, makes niose when you step on the brake.
8) Passengerside wheel makes noise. I loosenin the nuts and pull the wheel back...
left slack in the wheel and the hub and I spin it and it stops makin the noise. ( I had aftermarket wheels)
And here my mod list...
CURRENT MODIFICATIONS:
ENGINE MODS:
K&N COLD AIR FILTER
SUSPENSION MODS:
CRANKED TORSION BARS
EXTERIOR MODS:
32's BFG MUD'S
AMERICAN RACING BAJA 16X8
BILSTEIN SHOCKS
WESTIN GRILLE GUARD
CLEAR CORNERS
TOOLBOX WITH LIGHT INSIDE
FOGLIGHT MOD
TOOK OFF MUD FLAPS
INTETIOR MODS:
DOOR DING MOD
THROTTLE MOD
FLASHLIGHT MOUNTED ON JACK COVER
TINTED WINDOWS
Well here is my list I made them to look at...
1) Driveshaft makes noise when backing up or you can feel the slack or jerk when you take off.
2) Starter makes noise when started at cold starts or when it not hot.
3) Radio bezel is peeling
4) Center console laid is cracked.
5) Driverside power lock quit workin, will not unlock.
6) Sliding rear window makes noise when drivin. ( Would like to get a single window)
7) Driverside brake pad is tight, makes niose when you step on the brake.
8) Passengerside wheel makes noise. I loosenin the nuts and pull the wheel back...
left slack in the wheel and the hub and I spin it and it stops makin the noise. ( I had aftermarket wheels)
And here my mod list...
CURRENT MODIFICATIONS:
ENGINE MODS:
K&N COLD AIR FILTER
SUSPENSION MODS:
CRANKED TORSION BARS
EXTERIOR MODS:
32's BFG MUD'S
AMERICAN RACING BAJA 16X8
BILSTEIN SHOCKS
WESTIN GRILLE GUARD
CLEAR CORNERS
TOOLBOX WITH LIGHT INSIDE
FOGLIGHT MOD
TOOK OFF MUD FLAPS
INTETIOR MODS:
DOOR DING MOD
THROTTLE MOD
FLASHLIGHT MOUNTED ON JACK COVER
TINTED WINDOWS
#3
#5
#11
Yea the only thing i had on mine was a 3inch body lift, 33's, and a tanneu cover....for some reason when i pump the gas it burps back out, and after many times ate the clear coat off...its not peeling, just dull....and they blamed it on the body lift, whoever installed it put in an extension, but they cant fix it....i have 4 wheel drive problems, when it engages it clunks sometimes...they said thats normal...and my driveshaft has slack in it also, when you hit the gas you can feel it....and my window motors were loose, when you hit the button, they jumped all over the place...they put grease on them, i was like WTF?? the motors are loose, you can move the windows back and forth! But i guess thats what you get for "free"
Rocky
Rocky
#12
#16
Ok guys my post was a big lair....
couple weeks ago when I made this post...
I made a list of what is wrong with the truck...
Here my list...
1) Driveshaft makes noise when backing up or you can feel the slack or jerk when you take off.
2) Starter makes noise when started at cold starts or when it not hot.
3) Radio bezel is peeling
4) Center console laid is cracked.
5) Driverside power lock quit workin, will not unlock.
6) Sliding rear window makes noise when drivin. ( Would like to get a single window)
7) Driverside brake pad is tight, makes niose when you step on the brake.
8) Passengerside wheel makes noise. I loosenin the nuts and pull the wheel back...
left slack in the wheel and the hub and I spin it and it stops makin the noise. ( I had aftermarket wheels)
My dad tell's me I need to talk to the manager so I was thinkin WTF...
My dad tell's me it all that **** you got on your damn truck... (dad's voices)
So I call them the next morning...
The manager told me my Brakes were not coverd under warranty...
So ok... had to pay for that...
So there was nothing to do with the mods on the truck...
And it's thompson country ford... They are nice ppl to me...
EDIT: And everything got fixed on the truck for how...
I'm Thinkin they're send all the paper work and my paper I gave them to the...
Ford Headquarters maybe get some recalls...
couple weeks ago when I made this post...
I made a list of what is wrong with the truck...
Here my list...
1) Driveshaft makes noise when backing up or you can feel the slack or jerk when you take off.
2) Starter makes noise when started at cold starts or when it not hot.
3) Radio bezel is peeling
4) Center console laid is cracked.
5) Driverside power lock quit workin, will not unlock.
6) Sliding rear window makes noise when drivin. ( Would like to get a single window)
7) Driverside brake pad is tight, makes niose when you step on the brake.
8) Passengerside wheel makes noise. I loosenin the nuts and pull the wheel back...
left slack in the wheel and the hub and I spin it and it stops makin the noise. ( I had aftermarket wheels)
My dad tell's me I need to talk to the manager so I was thinkin WTF...
My dad tell's me it all that **** you got on your damn truck... (dad's voices)
So I call them the next morning...
The manager told me my Brakes were not coverd under warranty...
So ok... had to pay for that...
So there was nothing to do with the mods on the truck...
And it's thompson country ford... They are nice ppl to me...
EDIT: And everything got fixed on the truck for how...
I'm Thinkin they're send all the paper work and my paper I gave them to the...
Ford Headquarters maybe get some recalls...
Last edited by Bigwill41; 06-09-2005 at 06:24 PM.
Thread
Thread Starter
Forum
Replies
Last Post
dixie_boysles
General Ford Ranger Discussion
56
07-09-2009 03:23 PM
TheBearJeweler
General Ford Ranger Discussion
67
05-28-2009 09:01 PM
mental ambiguity
Audio & Video Tech
20
08-31-2006 02:13 PM