Wheel
#1
Wheel
Has anyone used these 15x12 with 2 inch backspacing on your ranger. Some people are telling me I can’t run these wheels because of the stud holes is that true or can I run them?
https://www.summitracing.com/parts/clm-400151410-2
https://www.summitracing.com/parts/clm-400151410-2
#2
#4
Only if you replace your wheel studs with 5/8" wheel studs, and get 5/8" lug nuts.
I don't know if your axles have enough material to safely drill them out to accept a 5/8" wheel stud.
You'll probably need to contact someone like https://www.moserengineering.com/ and see if they will make you some custom axles.
I don't know if your axles have enough material to safely drill them out to accept a 5/8" wheel stud.
You'll probably need to contact someone like https://www.moserengineering.com/ and see if they will make you some custom axles.
Thread
Thread Starter
Forum
Replies
Last Post