08 fx4 stalls for no apparent reason
08 fx4 stalls for no apparent reason
08 ranger fx4 engine dies randomly can uselessly get it started in a few .minutes and run fine for 3 to 6 months and out or nowhere it dies. always when driving otherwise always starts cold or hot and runs good. I would be happy with any ideas
Welcome to the forum
What engine do you have, 3.0l or 4.0l?
Could be a few things
Crank position sensor is the only sensor that can cause a no start or no run, but they rarely fail and never intermittently, but connector on the crank sensor can be loose, have a look
NOT Cam sensor, Crank sensor
Fuel system
Fuel pump relay and fuel pump itself
Fuel pump relay is in the engine fuse box, computer uses it to turn on fuel pump power, you can swap this relay with another one in that box, like AC relay or wiper relay
When you turn on the key, the computer will run the fuel pump for 2 seconds, but only 2 seconds, you can hear it in the cab, a hummm
Try it now until you KNOW what it sounds like
At the next stall, no start, LISTEN to see if fuel pump is coming on, it comes on EACH time you turn the on, so cycle key off and on to see if its working
If the fuel pump relay was not working the computer would set a code for that, but computer has no code for broken fuel pump
Computer would also set a code for no Crank sensor pulse, usually
What engine do you have, 3.0l or 4.0l?
Could be a few things
Crank position sensor is the only sensor that can cause a no start or no run, but they rarely fail and never intermittently, but connector on the crank sensor can be loose, have a look
NOT Cam sensor, Crank sensor
Fuel system
Fuel pump relay and fuel pump itself
Fuel pump relay is in the engine fuse box, computer uses it to turn on fuel pump power, you can swap this relay with another one in that box, like AC relay or wiper relay
When you turn on the key, the computer will run the fuel pump for 2 seconds, but only 2 seconds, you can hear it in the cab, a hummm
Try it now until you KNOW what it sounds like
At the next stall, no start, LISTEN to see if fuel pump is coming on, it comes on EACH time you turn the on, so cycle key off and on to see if its working
If the fuel pump relay was not working the computer would set a code for that, but computer has no code for broken fuel pump
Computer would also set a code for no Crank sensor pulse, usually
Thread
Thread Starter
Forum
Replies
Last Post



