I Am trying to add Power mirrors to my Non power mirror truck,. Switch is out of 2007 4.0 it will be going in my 2008 3.0. I have Mirrors that can handle the power , now i have the switch..... I just have no idea where to connect all these color. does anyone have a diagram or know the meaning of each color wire from the switch ?
The Part # on the side is:
3W7T-17B676-AAW
PA66

i see
1. Red/Dark Gray
2. Orange/Light Gray
3. Black/Blue
4. Solid Gray
5. Blue/Green
6. Orange/Purple
7. Yellow/Purple

 

Sorry not seeing the same colors you are in the picture

2008 diagram below, which matches the picture wire colors

I also have 2003 and 2006 mirror diagrams, they share the same wire colors, so there was a change in wire colors in 2007 or 2008 as wire colors are different

The 2006 also doesn't match your color list or picture

You need full time 12v and ground to/at the switch, if you want mirrors to work key off, but that's users choice
And then 3 wires to passenger side door/mirror

You can usually see the "pin numbers" on the power mirror connectors

 

You totally nailed it bro ! much appreciated ! that 2008 diagram match's up.

 

Hey, I’m kinda new to the ranger forums. I have a 2000 ford ranger 3.0, I had regular manual mirrors, and have switched to power mirrors. I got the switch and I plan to power them through add-a-circuit like I did with my universal power windows… the problem I’m having is figuring out what each colored wired goes to and how to hook it up, I’m not that good with reading curicuit diagrams. The switch is from a 2004? I think? And the mirrors are for 2007? They came from trq. I can get them to move with messing with some wires. But I just need to be told what wires get connected to where.

 

did you see the PDF Diagrams ? not sure if the 2004 and 2006 are the same wiring or not.