General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Central locking & keyfob issue

Thread Tools
 
Search this Thread
 
Old May 3, 2015
  #1  
beastanglia's Avatar
Thread Starter
|
Member
Joined: May 2015
Posts: 4
Likes: 0
From: Suffolk
Central locking & keyfob issue

I have an issue with the keyfob/central locking. The central locking works ok with the key, but the keyfob only arms and disarms the alarm, it won't lock or unlock the doors. Any ideas?

Lloyd
 
Reply
Old May 4, 2015
  #2  
RonD's Avatar
RF Veteran
iTrader: (1)
Joined: Jan 2014
Posts: 30,635
Likes: 2,952
From: Vancouver, BC
Try reprogramming the key fobs, this is often needed after changing batteries in fobs.

get in vehicle and close and lock the doors, do not touch brake pedal during any of this

Turn on and off the key 8 times in 10seconds end 8th time with key in RUN(on), doors should unlock and lock and if door chime is working it will be on.
Press the lock button on fob
Doors should unlock and lock, and chime should go off
Turn off key

Test fob

Repeat same procedure for any new or old fobs, you have to do them one at a time


Video of it here:
 
Reply
Old May 7, 2015
  #3  
beastanglia's Avatar
Thread Starter
|
Member
Joined: May 2015
Posts: 4
Likes: 0
From: Suffolk
Originally Posted by RonD
Try reprogramming the key fobs, this is often needed after changing batteries in fobs.

get in vehicle and close and lock the doors, do not touch brake pedal during any of this

Turn on and off the key 8 times in 10seconds end 8th time with key in RUN(on), doors should unlock and lock and if door chime is working it will be on.
Press the lock button on fob
Doors should unlock and lock, and chime should go off
Turn off key

Test fob

Repeat same procedure for any new or old fobs, you have to do them one at a time


Video of it here:
Hi, Thanks for this info. I tried as you suggested but unfortunately it did not work. I didn't get the unlock and lock to happen. I did try several times to make sure i had followed the instructions correctly. Any further ideas ??
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
soulrobber
Drivetrain Tech
6
Dec 6, 2018 03:49 PM
Phil99xlt
OLD - Engine & Drivetrain
0
May 26, 2013 08:39 PM
Hermy
2.9L & 3.0L V6 Tech
5
Aug 6, 2010 10:12 PM
monkeysteeler12
General Ford Ranger Discussion
20
Mar 8, 2009 05:18 PM




All times are GMT -6. The time now is 03:40 PM.