General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Ford Ranger 2004 international facelift model (2.9L) spun bearings again and again

Thread Tools
 
Search this Thread
 
Old Apr 7, 2023
  #1  
shaminda's Avatar
Thread Starter
|
Member
Joined: Apr 2023
Posts: 2
Likes: 0
From: colombo
Icon5 Ford Ranger 2004 international facelift model (2.9L) spun bearings again and again

Hey There,
My engine overheated due to a blocked radiator, which caused me to replace the piston bearings. After driving about 3000 kilometers, the engine suddenly stopped in the middle of the road. I tried starting the engine a few times and it eventually started, so I pulled over to check if there was anything wrong under the hood. However, the engine stopped again shortly after. I was unable to start the engine and it felt like it had seized up, so I had to tow the vehicle to a garage. We took apart the engine again and discovered that the bearing on the second piston had spun, So I replaced all four bearings and the connecting rod on the affected piston. Unfortunately, after driving for only around 50 kilometers, the engine died again. We made sure there wasn't any oil blockage, overheating, or a bent crankshaft. Anyone got any ideas on what could be causing this?
 

Last edited by shaminda; Apr 7, 2023 at 07:22 AM.
Reply
Old Apr 7, 2023
  #2  
2011Supercab's Avatar
Member
Joined: Jun 2018
Posts: 2,365
Likes: 393
From: Everett, WA
If you wouldn't have used such a light colored font, I could probably read your post.
 
Reply
Old Apr 7, 2023
  #3  
RonD's Avatar
RF Veteran
iTrader: (1)
Joined: Jan 2014
Posts: 30,635
Likes: 2,952
From: Vancouver, BC
Welcome to the forum

2004 South American model Ranger
What engine is it?

Is it a gasoline or diesel engine?

There was a W9 - 2.9 L 4cyl diesel offered
We never had that engine so we can't help much
 
Reply
Old Apr 7, 2023
  #4  
RoseBud68's Avatar
Member
Joined: Jul 2022
Posts: 954
Likes: 175
From: PSL FL
Yeah, Take it to a real mechanic.
 
Reply
Old Apr 7, 2023
  #5  
shaminda's Avatar
Thread Starter
|
Member
Joined: Apr 2023
Posts: 2
Likes: 0
From: colombo
yeah this is the W9 - 2.9 L 4cyl
thanks for trying to help
 
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Shidded_Farded
2.9L & 3.0L V6 Tech
4
Dec 23, 2022 03:25 PM
JeffDunham
4.0L OHV & SOHC V6 Tech
1
Oct 14, 2021 10:29 AM
Poison5.45
General Ford Ranger Discussion
1
Jan 2, 2021 12:48 PM
mr.spock
General Technical & Electrical
2
May 17, 2014 01:19 PM
Mike B
General Technical & Electrical
0
Feb 5, 2012 04:03 AM




All times are GMT -6. The time now is 01:10 AM.