Gas Gauge Stuck on E
Thread Starter
|
Member
Joined: Sep 2019
Posts: 94
Likes: 8
From: Raleigh, NC
Gas Gauge Stuck on E
1993 Ford Ranger XLT, 2.3L, 5-Speed
All, new member and just bought a project truck. Original problem was that gas gauge was bouncing all over the place. Replaced the fuel pump, sending unit, and fuel filter. Now the gauge is reading E without bouncing around. Twice I have started the truck at it read correct, but once I turn the truck off it goes back to E. Before you ask, yes, there is fuel in the tank.
Thanks for the help.
All, new member and just bought a project truck. Original problem was that gas gauge was bouncing all over the place. Replaced the fuel pump, sending unit, and fuel filter. Now the gauge is reading E without bouncing around. Twice I have started the truck at it read correct, but once I turn the truck off it goes back to E. Before you ask, yes, there is fuel in the tank.
Thanks for the help.
Last edited by art1029; Sep 27, 2019 at 10:30 AM. Reason: Added year and model
Welcome to the forum
Depending on the year........................should include that in all posts, its most likely the anti-slosh module on the back side of instrument cluster
Google: ford ranger anti-slosh module
Common issue on Fords
Depending on the year........................should include that in all posts, its most likely the anti-slosh module on the back side of instrument cluster
Google: ford ranger anti-slosh module
Common issue on Fords
Thread
Thread Starter
Forum
Replies
Last Post
