Ok, people that have used Hella harnesses, specifically 500's.

I wired them up and one works fine...the other, passenger side one doesnt.

I checked and rechecked the connections. And I cant find anything at all wrong.

Any help would be great. Thanks guys.

 

did you ground it?

 

Yes. Followed the directions. Grounded one light to the battery and one to a place on the frame with some pre existing grounds from the battery.

 

Check the power to the light thats not working with a volt meter

 

check the bulb. it might have gone bad

 

x2 on checking the bulb. and grounds.

if you need a hand, holler. i've done quite a few of these now, with success

 

the ground you ran to the battery, take that off and ground it to the frame. ive never heard of running a ground to the battery and ive never seen it in the hella directions

 

x3 I did all my buddies jeeps with them and my Subies, I'm in the process now of double relaying 4 lights on my truck just waiting for the metal to dry

 

Ok, electrical gremlins got me again. When i wired them up, only one worked. 10 minutes ago when I started driving home, i decided to just turn them on for ****s and giggles...and they are both working now...

I ran a ground to the battery because I thought ground was ground...lol
I'm not any kind of electrician.lol

Thanks though guys.

 

Wait why did you use the battery and hoped you relayed them w/o tapping the high beams...

 

he said that he grounded one light to the battery.