Hey ..lol i was just trying the Blinker Mod and i cant get it to work and i cant use my blinkers or hazzerd laights ..lol forgive my spelling but im like freakin out Right now lol can anyone help..????

 

wooo Goose creek!!!

im over on James Island..

but anywho

check your fuses make sure your getting power to the bulb..

make sure all your connections are tight and a good connection..

 

lol Sweet ...ill check the fuses and make sure its not out

 

so lets see i keep blowing the fuses that lets the blinkers and the driver side marker isnt workin now lol...i dont know what to do

 

Cut the ground wire (black) going to the corner.

Then find the cut end of the black wire coming FROM the corner, NOT the one that goes back into the harness to ground.

Then tap that end of the black wire FROM the corner to the hot wire of the turn signal as described in my post above.

(If the black wire is making the fuse melt, then you are wiring to the wrong cut end of the black wire.)

If you do this right it will work

 

lol i know imma sound like a Dumb **** but take a pic of the it should look like so i can see what it looks like lol cuz im like SOOO lost

 

We all have brain farts now and again but here is my help thread

https://www.ranger-forums.com/forum2...ad.php?t=49681

i dont have any pics but its not hard....plus i dont feel like pullin out my headlight in the rain.

 

ahh im such a loser hahaha i know what i did and let just say ill be makein a trip to the junk yard.

 

what part do you need..i MIGHT have one laying around..or know somebody who does..

 

i need the part that the bulb goes into for the side marker ..with a lil bit more wire than i left myself .lol ...im such a dumb ****

 

we've all been there haha, the wiring for my hellas are cut close at points

 

I'll try this tomorrow!!!