I Need Help. (Question Inside)
#1
I Need Help. (Question Inside)
I bought a 92 Ford Ranger with a 3.0 and an m5od really cheap and it needed a transmission. So I went out and purchased an m5od from a 95 ranger I believe it bolted up nicely but in the tailshaft of the transmission there is no hole for the VSS sensor(so obviously my speedometer/odometer doesnt work). So what I did was took the tailshaft off the busted transmission that came with the truck and stuck it on the new transmission. Now there is no gear inside the trans to spin this sensor for the speedo. Is there anyway I can use this trans and the gear from the old trans to get my speedo to work? I dont have much experience inside of transmissions. (ohh and I have already checked the speedo cable/vss sensor/and instrument cluster broke none of them are broke). Thanks
Thread
Thread Starter
Forum
Replies
Last Post
2001fordranger
Exterior Semi-Tech
13
08-05-2009 05:49 PM
moacsupreme
Exterior Semi-Tech
5
09-18-2008 09:57 PM
Redneckstone
General Ford Ranger Discussion
13
02-25-2008 09:01 AM