Looking for electrical manual for my 2008 Ranger
Thread Starter
|
Member
Joined: Aug 2017
Posts: 3
Likes: 0
From: Ottawa
Looking for electrical manual for my 2008 Ranger
Hi
I have electrical probems.
No power to start solinoid fuse.
Also would like to know what pin # for the ground wires to the EVAP system, purge, vac test sensor and the other one.
Hope to hear from you.
Thanks
I have electrical probems.
No power to start solinoid fuse.
Also would like to know what pin # for the ground wires to the EVAP system, purge, vac test sensor and the other one.
Hope to hear from you.
Thanks
Not sure if this is what you are looking for: https://www.ebay.com/i/292200153565?...D1274399925034
Price is right !
Price is right !
Thread Starter
|
Member
Joined: Aug 2017
Posts: 3
Likes: 0
From: Ottawa
Thanks
very appreciated, need it today.
EVAP parts are working on bench test, all 3 have 12v and system holds pressure , still as EVAP code.
Wondering if ground to ECM are conductive.
Those are the pin # I'm looking for.
The Ecm has delicate wires cuz of little corrosion.
Touched the harnesses and now no power to solinoid fuse, no start no click. Lots of fun
EVAP parts are working on bench test, all 3 have 12v and system holds pressure , still as EVAP code.
Wondering if ground to ECM are conductive.
Those are the pin # I'm looking for.
The Ecm has delicate wires cuz of little corrosion.
Touched the harnesses and now no power to solinoid fuse, no start no click. Lots of fun
Thread
Thread Starter
Forum
Replies
Last Post
killersoundz
Drivetrain Tech
4
Mar 17, 2014 08:38 PM
04blackedge
OLD - Interior, Exterior, Electrical, & Misc.
1
May 7, 2009 04:43 PM
