Out of allignment. Cam kit?
#1
Out of allignment. Cam kit?
So i have had some bad camber for a while (tires look like this / \). I took it to the schwab and they alligned it as much as they could but its still not within specs. they did not say anything about a cam kit but i have heard about it a little on the forums. is this something i could use to get it all the way alligned? i do have a 4" superlift if that makes a difference.
#2
Yes.....the new superlifts come with cam washers.
I still have yet to install my cam bolts, but i bought Ingalls cam bolts from Summit. My brother runs those on his slammed ride, and i'll run them on my lifted ride as well. You need to order 2 of them. Each box comes with 2 bolts, and you need 4 total bolts, so quanaity of 2 must be ordered. Bought them from Summit.
I still have yet to install my cam bolts, but i bought Ingalls cam bolts from Summit. My brother runs those on his slammed ride, and i'll run them on my lifted ride as well. You need to order 2 of them. Each box comes with 2 bolts, and you need 4 total bolts, so quanaity of 2 must be ordered. Bought them from Summit.
#5
Yea...suprised that schwaabs didn't say anything about it. When I was getting prices, they wanted something like $100 for install and purchase of the $20 bolts! I can't believe that they didn't try to sell you those. weird. If you are in portland this weekend or whatever, you can buy my bolts for my truck, and i gotta make an order through summit anyway....
http://store.summitracing.com/partde...5&autoview=sku
http://store.summitracing.com/partde...5&autoview=sku
#7
#8
#10
The superlift kit comes with cam washers(i believe). And should be installed if needed. My truck is darn near right on w/o the cam washers. But.....as said in other threads, alignment shops want seriously like $100 for cam bolts....so they'll align it as best as they can w/o telling you about the cam bolt option to get it perfect. That is your issue....your upper control arms are sucked in too much.
#14
#19
#21
#22
so i got the cam bolts pictured above and took them in to get installed and aligned. they guy said that these bolts would give me less adjustment than i already have. he said for camber adjustment you can either use cams or slots and that i was using slots which give more adjustment. has anyone heard of this or do i need to take it somewhere else?
#25