A Parts Interchange Question or Two
Thread Starter
|
Member
Joined: Apr 2016
Posts: 39
Likes: 8
From: Mesa, AZ
A Parts Interchange Question or Two
Vehicle: 2004 Ford Ranger XLT 4x2 Super Cab
Subject: Possible front disc brakes interchange?
The 4x2 2004 Ranger has the wheel bearing hub and disc rotor cast and machined as a single piece.
Q1: In later model year(s) did the 4x2 Ranger come with the separate front wheel bearings hubs and rotors similar to the 4x4 Rangers?
Q2: If answer to Q1 is "yes", can the later separate bearings hubs and rotors be fitted to the earlier years without replacing the spindles?
Q2.1: Will the early and late spindles interchange?
Many thanks to the experts on this board! You guys are the best!
Subject: Possible front disc brakes interchange?
The 4x2 2004 Ranger has the wheel bearing hub and disc rotor cast and machined as a single piece.
Q1: In later model year(s) did the 4x2 Ranger come with the separate front wheel bearings hubs and rotors similar to the 4x4 Rangers?
Q2: If answer to Q1 is "yes", can the later separate bearings hubs and rotors be fitted to the earlier years without replacing the spindles?
Q2.1: Will the early and late spindles interchange?
Many thanks to the experts on this board! You guys are the best!
Member
Joined: Jun 2019
Posts: 397
Likes: 48
From: Fort Wayne, IN
Vehicle: 2004 Ford Ranger XLT 4x2 Super Cab
Subject: Possible front disc brakes interchange?
The 4x2 2004 Ranger has the wheel bearing hub and disc rotor cast and machined as a single piece.
Q1: In later model year(s) did the 4x2 Ranger come with the separate front wheel bearings hubs and rotors similar to the 4x4 Rangers?
Q2: If answer to Q1 is "yes", can the later separate bearings hubs and rotors be fitted to the earlier years without replacing the spindles?
Q2.1: Will the early and late spindles interchange?
Many thanks to the experts on this board! You guys are the best!
Subject: Possible front disc brakes interchange?
The 4x2 2004 Ranger has the wheel bearing hub and disc rotor cast and machined as a single piece.
Q1: In later model year(s) did the 4x2 Ranger come with the separate front wheel bearings hubs and rotors similar to the 4x4 Rangers?
Q2: If answer to Q1 is "yes", can the later separate bearings hubs and rotors be fitted to the earlier years without replacing the spindles?
Q2.1: Will the early and late spindles interchange?
Many thanks to the experts on this board! You guys are the best!
Vehicle: 2004 Ford Ranger XLT 4x2 Super Cab
Subject: Possible front disc brakes interchange?
The 4x2 2004 Ranger has the wheel bearing hub and disc rotor cast and machined as a single piece.
Q1: In later model year(s) did the 4x2 Ranger come with the separate front wheel bearings hubs and rotors similar to the 4x4 Rangers?
Q2: If answer to Q1 is "yes", can the later separate bearings hubs and rotors be fitted to the earlier years without replacing the spindles?
Q2.1: Will the early and late spindles interchange?
Many thanks to the experts on this board! You guys are the best!
Subject: Possible front disc brakes interchange?
The 4x2 2004 Ranger has the wheel bearing hub and disc rotor cast and machined as a single piece.
Q1: In later model year(s) did the 4x2 Ranger come with the separate front wheel bearings hubs and rotors similar to the 4x4 Rangers?
Q2: If answer to Q1 is "yes", can the later separate bearings hubs and rotors be fitted to the earlier years without replacing the spindles?
Q2.1: Will the early and late spindles interchange?
Many thanks to the experts on this board! You guys are the best!
Q2 and Q2.1: See above.
Thread
Thread Starter
Forum
Replies
Last Post
BOTDead
General Ford Ranger Discussion
2
Jun 17, 2021 07:14 AM
