I have a 1997 ranger 4.0. It sat mostly idle for about 2 years.
Wgen I started it up, the power windows are not working, not driver and passenger side.
I pulled the panel off the door, I have power going to the master switch in the driver side until I press one of the buttons. Then the power wire no longer has power for several minutes. I cannot detect voltage on any of the other wire at the switch when this happens. Then the power comes back on. I have done this with the truck running and in accessory mode.
There is no clicking in the relays under the dash. I have pulled every relay and checked them, they are all operating. No fuses are broken- tested for continuity, not just looking at them.
Not sure what to try next.
Additionally, the airbag light flashes on/off or stays on.
any suggestions would be greatly appreciated!