Radio, OHC and Power Windows quit working. - Ranger-Forums - The Ultimate Ford Ranger Resource


General Technical & Electrical General technical and electrical discussion for the Ford Ranger that does not fit in any other sub-forum.

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
Old 04-25-2009
GSUhooligan's Avatar
Member
Thread Starter
 
Join Date: Apr 2009
Location: Temple, GA
Posts: 33
Radio, OHC and Power Windows quit working.

So, I finished the OHC and auto mirror install. I made sure everything was working for a day or two before I put everything back together. Thanks to the guys in my other thread, I figured out the problem with my mirror. So everything was working, so I put the knee panels back. I think I may have pinched a wire when I screwed the metal panel back in b/c my radio, ohc and power windows are no longer working. I took everything back off, and saw the wire from the ohc to the radio had lost some of the protective rubber, but it was still intact. So I replaced that section of wire, but I still couldn't get it working. I checked the radio and PW fuses, and they are fine. Does anyone know what else I should check?
Reply With Quote
  #2  
Old 04-25-2009
Redrocket's Avatar
Member
iTrader: (6)
 
Join Date: Jan 2007
Location: Waynesville n.c
Posts: 1,993
did it work before you installed it??? sense your radio and windows arnt working you eather wired something up wroung to the gem are you got a bad relay
Reply With Quote
  #3  
Old 04-25-2009
GSUhooligan's Avatar
Member
Thread Starter
 
Join Date: Apr 2009
Location: Temple, GA
Posts: 33
Everything worked fine until I tried reattaching the metal knee panel. I didn't wire anything to the gem.
Reply With Quote
  #4  
Old 04-27-2009
GSUhooligan's Avatar
Member
Thread Starter
 
Join Date: Apr 2009
Location: Temple, GA
Posts: 33
Did ya'll know there are 2 fuses for the GEM? LOL I feel like an idiot. Sorry for wasting your time.
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Manual windows and locks to Power Windows Quinnin Interior Semi-Tech 31 10-30-2016 10:00 AM
if your power windows and locks aren't working joshtank General Technical & Electrical 0 04-20-2011 06:24 PM
OHC Quit Working mossyoak1992 General Technical & Electrical 13 07-08-2009 12:11 PM
changing the windows to power windows smokinedge General Technical & Electrical 1 05-28-2008 07:02 PM
Odometer Quit working PhilpotHunter General Technical & Electrical 4 06-07-2005 02:30 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 05:09 PM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.