Anyone know how to do it? I don't want to break it!

 

You can just let me break it then!

 

the *** or the whole thing?the *** just pops off.and the whole thing unscrews from the back of the bezel.

 

Anything special about getting the **** off? I tried pulling and it didn't come as easily as the HVAC controls did or I'd expected it would. Do I just need some more oomph?

 

ya

 

pull harder

 

there are either 2 or 3 phillips screws on the back of the switch....just pull the plugs off the switch, remove the screws and you're all set

 

Why are you taking it off anyways?

 

it just pulls off like the others said.

 

why are you takin it off exactly???

 

I beleive he is parting out his truck that he totalled so im thinking he's taking it off to sell it..

 

that is correct...

 

I unscrewed mine and pulled the switch out from the rear and the **** poped off in the process.

Why are you taking it off ?

 

one person has bought the bezel already and another person might want the 4x4 drivetrain stuff so i'm just making sure ive got as much of it as i can get.

 

I want to know if I can use a 4x4 switch to run like, and on/off/other switch. It has 3 positions, so why not, right?

 

i bet you could.

 

We'll find out...maybe:

My thread regarding that...

 

Remove the bezel, pull the "****" off, unplug the clip on the back side using a screwdriver or xactoknifes(basically, it's a REAL PAIN IN THE A## to remove the clip) on the back side, 2 phillips screws need removed, then pull out the switch on the back side. You do it once, you know how forever....it's like ridin a bike. Good luck Kyle.