I replaced the driver's side since the hose was cracked, and the nozzle as well..

The passenger side hose is cracked, so I removed it.. now I am wondering how the hell do you fish the tube through???

I took some pictures but I can't see anywhere to access where you would actually be able to pull or push the tubing through so you can pull it out from the top or pull it through the bottom where the engine is..

Any ideas or help?

Thanks,
-Nigel

nm got it, there is a cubby hole ont he right side.

w00t w00t

-Nigel

hey man how did u change out the passenger side nozzle?

Should be a little box with two screws, take the two screw out and you can then have access to pull the hose all the way out.

The box is next to the firewall near the bottom of the windshield.

-Nigel

U talking about the power control module?
The round tube thing that has lots of wires sticking out on the side?
So just remove the nut on the left and right and pull it out?
And u will have access to the tube?

Do u mean the color matched cover thing? with 3 screws.
2 on top, 1 on bottom?
That cover seem to be glued on from 4 corners...

How did you replace spray nozzle on driver side?

My driver side spurts washer fluid, passenger side is okay.

I need to know how to disconnect washer hose from underside of nozzle mounted on metal cowling.

Wiper motor blocking access to bottom of driver side nozzle.