Ive got 2 6 inch Cepek lights and i wanted to mount them onto my new bumper (woot!) and ive picked up everything i need (wire, in-line fuse holder, fuse, terminals, quick disconnects, and a switch i want to mount in my cab.) but someone said i need a relay...What size relay do i need? What should it look like? How do i wire it up? Where can i get one? lol help please as much as possible as far as the Relay goes, ive never wired one up before :-P. Thanks

 

Most aftermarket lights come with a 20 Amp, 4 prong relay. I forget how you have to wire it up, but they usually come with a wiring diagram printed on them to help you out.

You can pick up a standard relay at just about any auto parts store, they're not expensive.

 

better pic:



http://www.4wheelparts.com/Lights-Li...t_pn=K%2fC3300

 

https://www.ranger-forums.com/forum2...ad.php?t=53994

that should help with wiring them up.

 

mine didnt come with a kit, i just bought the lights off a guy on here :P so this would be my first time hooking up electrical stuff.

 

if your gonna do this without me there then use that link he posted pretty much everything i would have told you.

 

Don't know what auto parts stores you have in CA, but over here we've got Pep Boys and Autozone, I know for a fact that each of them carry Pilot brand wiring setups for foglights with all the wiring you'll need, a switch and relay. You might want to look into it.

 

ya we have pep boys, autozone and kragen to go to. They will have everything you need there Lnace.

 

im going to do it with you there lol, im just tryin to gather all my supplies i need so we dont need to make another Kragen run lol. So far this is what i have:
-two lights
-rocker switch
-wire
-in line fuse holder w/ fuse
-a lot of electrical tape lol

 

sounds like a good start but don't forget the butt crimps and the relay. when you got everything let me know