The service manual that I have and anything I have looked for at my local library don't seem to have what I am looking for, so I was hoping to get someone here that could answer my question for me.

My 4WD is not working I have narrowed this problem down to the relay for the 4WD/Transfercase. Problem, I can't find the diagram anywhere to know which one I should pull and replace.

The manual shows the fuse box that is in the cab, but I need the diagram for the box under the hood. The book is supposed to be for up to 2000 rangers. The diagrams that I need stop at 1996.

Can anyone help me out?

Thanks

 

FUSE Position 3 (20amp mini fuse) under the hood is the 4 Wheel drive Electronic Shift Relay and Electric Shift Control Module relay fuse. If that fuse is okay, check for power on the Yellow and Orange wires at the transfer case.

If that is okay, check for power on the Gray/Red wire going into the General Electronic Module behind the radio...pin #21.