i used the search only found a few with the dual piller pods BUT none on an 03..im looking at gettin a volt meter and a trans temp guage but what do i do with the handle on the piller...is there a pice i can buy from ford thats for an older truck but would work on mine to erradicate the handle or is there another way around it? pics would be awsome! thanks

 

The Autometer double pod fits an 03 with the grab handle removed and the color is a good match for the LII A-pillar trim.

I reused one of the small black grab handle screws and a black plastic washer to cover the hole.

Another way is to use a plastic automotive interior push pin in a matching color to cover it.

Neither solution looks 'factory' but it does eliminate the exposed hole.

 

ive got same pillar on mine. works fine, like bob said

 

Autometer Ranger dual gauge pillar pod: P/N 15308
Available from Summit, Jegs, etc.

www.summitracing.com
Summit part number ATM 15308

 

awomse thanks so much yea i got everything ready i just have to pick it up.. just wanted to make sure it would look have decent first thanks guys!

 

If you position it correctly, it will not interfere with the operation of the DS sunvisor or the flow from the side window defogger.