Removing 60/40 Seat Cushions
#1
Removing 60/40 Seat Cushions
The driver's side seat in my truck has a big tear in it now from me sliding over it over the last few years. I found a nice replacement at U-Pull-It today, but I don't want the whole seat since my back support is still fine. How do you remove the seat cushion from the frame and back support of the seat. A guide would be nice. Thanks :)
#2
#4
Old Guy User…
iTrader: (12)
On the lower portion of the back there is either velcro or just an overlapped portion, roll the covers off; after that the foam will be stuck to the metal so go easy and pull up, maybe use a thin blade or stick to work under the cushion.
The bottom is similar, remember to roll the inside out and it goes back on the same way.
If the seats are the same color think about using the passenger seat from the JY truck as a drivers seat by switching the track mechanisms.
The bottom is similar, remember to roll the inside out and it goes back on the same way.
If the seats are the same color think about using the passenger seat from the JY truck as a drivers seat by switching the track mechanisms.
#6
#8
#10
Thread
Thread Starter
Forum
Replies
Last Post
rngprerunner
Interior, Exterior, & Electrical
19
07-09-2020 07:11 AM