Mine is plumb worn out, are there any later model split buckets that bolt in?

 

You have whats called a 60/40 bench seat

Yes you can switch to bucket seats, with or without center console

1985 Ranger with explorer bucket seats and console seen here: https://www.therangerstation.com/wp-...er_seats-2.jpg

Good article to read here: https://www.therangerstation.com/tec...ger-seat-swap/

Pretty much any year Ranger seats will work, on the 2000 and up the seat tracks are welded on but can be cut off and then your seat tracks bolted on

If you have an extended cab pretty much any Ranger(1983-2011) or Explorer(pre-2002) seats can be used, but.................4-door Explorer seat backs DO NOT fold forward to access behind the seats, and on 2-door Explorers only the passenger side seat back folds forward

If you have a Regular cab you have to watch out for the "High back" bucket seats because they hit the rear window and tilt forward if you try to put the seat all the way back

You can use heated or electric seats as well if you want to do some wiring