Started a little project
#1
Started a little project
So I last year I installed an Exploder radio bezel that has the rear window wiper control in it.
So I removed the switch and the plastic display thing above it. I sanded the display down to the clear.
Cut off the little plastic circle that lit the switch.
(no pic) but i put on some letter stickers and painted over it.
I then pulled off the stickers and this is what is left.
I dont know if I like it this way or with the stickers still in place, kinda gives it a raised look.
I plan on doing the same thing on the 4x4 switch. because on the exploder bezel it says 4x4 auto instead of high, or i can put the one in from the pics.
Im planning on putting lights behind it so that it shines through the letters
What do you think
So I removed the switch and the plastic display thing above it. I sanded the display down to the clear.
Cut off the little plastic circle that lit the switch.
(no pic) but i put on some letter stickers and painted over it.
I then pulled off the stickers and this is what is left.
I dont know if I like it this way or with the stickers still in place, kinda gives it a raised look.
I plan on doing the same thing on the 4x4 switch. because on the exploder bezel it says 4x4 auto instead of high, or i can put the one in from the pics.
Im planning on putting lights behind it so that it shines through the letters
What do you think
#4
#9
#11
And this idea actually looks pretty darn neat, Will be interested to see what your coloring scheme will look like when its all lit up =)
Thread
Thread Starter
Forum
Replies
Last Post
Kosmo04
Suspension Tech
59
03-06-2010 04:15 PM