I'm picking up the paint and painting my interior tomorow. I was gonna get Krylon in Red and a clear coat? that sound right? I'm sanding it down first then painting it all, now I'm doing the door bezels, going to attempt the radio bezel, and saw some guys had the "vent"s up on the top of dash, on both driver side and passenger side, not the actual air vents, but the slots ontop, do those just pop out and pop back in> Do i need a primer or anything?

 

I believe the Krylon Fusion does not require primer, but I'd do it anyways, just because I want a smooth surface. Remember to sand with very rough sandpaper, then work your way up to the higher and higher grit. And spray light coats, let it dry, then spray again.

Good luck.

 

I used Krylon Fusion as well but didnt use a primer. Its a smooth finish, but would probably be better with a primer like rong5 said. MAke sure you get the rubber coating off the radio bezel....I just used a scotch bite pad so i didnt dig too deep into the plastic. This is how mine turned out without primer.

It turned out pretty good....If I had to do it again. I'd use a primer.

 

^ that looks awsome with the radio matching :)

 

Thanks. That was planned lol.........no really.....it was. :-)

 

heh, me and a buddy of mine did ours at the same time. He used primer and I didnt. When it was all said and done his looked like **** and mine looked great. JUST krylon fusion is what i recomend.

 

Yea I'm really happy with the Krylon Fusion. There's someone on here who did theirs with something different that had a metal flake in it. It looked pretty sweet.

 

I used Duplicolor, no primer just sanded, then Duplicolor clearoat. Looks good but I heat Krylon Fusion is good too.

 

i used duplucolor primer, duplicolor paint, and duplicolor clearcoat with a hell of a lot of prep time.

 

I'm doing the same thing tonight/tomorrow. Radio bezel, cluster bezel, door bezels. Silver metallic. I'll post pics

 

What do you guys think, should I paint the black plastic and pouch around the radio mount to match the rest of the bezel or just leave it be?

 

whats the model number of that Pioneer? it looks awsome!!! So this weekend I'm gonna try some of this Krylon how would Orange look with a tan interior??? or just stick with glossy black?

good ole interior shot as of now:

 

ehh i would go with the gloss black on a tan interior