I was wondering on if I can get any help on climate control the one from a explore...I wasn't sure on what years that would work out for my 97 ranger...any instructions or advice would be thanked!!!!

 

95~2001 Explorer EATC will work, early have blue display, late have green. MUCH more info here:
http://www.cardomain.com/ride/296394/14

 

I have a complete setup I will sell you for $125.....comes with everything needed to install

I am glad I did it on mine

 

And I'm the author of the how-to Bob linked (thanks Bob) so I'm available for questions not answered by the how to. It goes from pages 14 for quite a few pages. Pay careful attention to the detail I've provided.

 

hey John did you get my PM about the additional step for '95-'97 Rangers using the '98-'01 EATC? There is an additional relay needed to send power to the a/c clutch since the '98+ EATC only sends out a low voltage signal to trigger the PCM....then the PCM sends the proper voltage to the a/c clutch..... If you didn't PM me and I will send you the picture and a little text to go with it....that way the how to covers those years......

 

Sounds good, Maurice, thanks. I'd like to include anything I missed. I'm using a relay in mine anyway. Didn't I set it up that way on the how-to? I thought I did.

 

I don't think you did....I think you had it just attaching the purple wires together......

When I get home and not on my iPhone, I will post up the relay diagram that I made for it..........then you take a look and see if it is already in the how-to that way.......cause I know for the '95-'97 Rangers you say to use 1 relay for making the "rear fan off" switch work.......

 

Cool, was just trying to find instructions on how to do this mod, has anyone ever done it to a 91-94 ex or ranger? anything differ there?

 

Edit: I'm being stupid. Okay, I see what you mean now.

 

what year ranger do you have? 93-97 are simular style ranger but i dunno about 91-92....and to answer your question...i dunno but you can look at the How To: sectionhttps://www.ranger-forums.com/forum2...splay.php?f=43

 

I have a 97 Ranger....if you look on n3elz's Car Domain page, specifically on pages 14-19 it is a very indepth how to on installing the EATC in a '95+ Ranger.......follow it and it will work.....

The EATC will NOT work in a '93-'94 Ranger.....they have different setup and the dashes are different so it will not mount in the dash

 

here is the relay diagram i was talking about John....

 

Very good. When I get time I'll redo the writeup, thanks. If you don't see it in a week or so REMIND ME AGAIN!!!

 

not a problem John....