Not sure if this is the right place to post this but im thinking of getting rid of my rear jumper seats and seatbelts in the back of my ext cab XLT 04' ranger. anyone interested in buying them? let me know

Jamesallenking@hotmail.com

in seattle area, but can ship i guess

 

Too late now but for further reference if you put NEED as the first word people are going to think you need them not trying to sell them

 

I'm thinking of removing the jumpseats in my 02 but can't figure out how to get them out. Any suggestions where to start?

 

You'll need a T45(?) torx socket. Pull the plastic covers off the bottom of the jumpseat (they are held in with pressure clips) and then look at the side closest to the outside of the truck. Put your torx bit on an extension and stick it all the way back there and pull out that bolt holding the seatbelt in. Then fold the seat down and take out the 3 normal hex bolts and one torx bolt on the top of the bracket holding the seat in, and you're set. This is for a 4-door extended cab. I don't know how to pull the 2-door extended cab jumpseats.