looking for plastic dyes
#1
looking for plastic dyes
basically i found the proper seat belt latches that are long enough and actually bolt to the re-inforced cab cross-member but???
( out of a winstar )
neither are the same colour ( paint is not an option )
looking to dye them dark grey or black
any body know where i can purchase some
( out of a winstar )
neither are the same colour ( paint is not an option )
looking to dye them dark grey or black
any body know where i can purchase some
#2
Old Guy User…
iTrader: (12)
The SEMs Paint has the right colors (use their chart to match) and unless you damage the part should stay on with out a problem.
I use the DuPont Plastic Adhesion Promoter and have had no problems.
I use the same paint on metal but use the Metal Etching Primer first.
As far as a “Dye”, I am not sure that would even work. Dyes usually need to be absorbed to adhere but I don’t think plastic will absorb anything, maybe one of the plastic paints ?
Luck on your quest.
I use the DuPont Plastic Adhesion Promoter and have had no problems.
I use the same paint on metal but use the Metal Etching Primer first.
As far as a “Dye”, I am not sure that would even work. Dyes usually need to be absorbed to adhere but I don’t think plastic will absorb anything, maybe one of the plastic paints ?
Luck on your quest.
#4
#7
Thread
Thread Starter
Forum
Replies
Last Post
pacodiablo
General Ford Ranger Discussion
8
01-18-2005 04:42 AM
pacodiablo
General Ford Ranger Discussion
11
09-17-2004 10:49 AM