Seats
Read here: Using Seats From Other Fords In Your Ranger
And also click on the Links in that article
The seats will fit it is the tracks that would be in question, they may be welded on to the seats in your 2000, they were bolted on in earlier years, so easier to work with.
So you may need to cut off the 2000 tracks and drill holes in them to bolt the '89 seats to them
The tracks bolt to the floor and the hole positions in the floor changed over the years, and you could re-drill the floor pan, but usually easier to use original tracks and bolt new seats to them
Unless you want to add power and/or heated seats, then you need to change the tracks most likely
And also click on the Links in that article
The seats will fit it is the tracks that would be in question, they may be welded on to the seats in your 2000, they were bolted on in earlier years, so easier to work with.
So you may need to cut off the 2000 tracks and drill holes in them to bolt the '89 seats to them
The tracks bolt to the floor and the hole positions in the floor changed over the years, and you could re-drill the floor pan, but usually easier to use original tracks and bolt new seats to them
Unless you want to add power and/or heated seats, then you need to change the tracks most likely
Thread
Thread Starter
Forum
Replies
Last Post
Want to Trade: Vancouver-Canada: 2001 bucket seats for 60/40 bench seats
Thefutur
OLD - Interior, Exterior, Electrical, & Misc.
1
May 5, 2016 08:39 PM
Want to Buy: Seats! Not bench seats
KobyWright
OLD - Interior, Exterior, Electrical, & Misc.
2
Mar 27, 2016 12:46 AM
For Sale: Seats, seats, SEATS! NC
drppdyllwrngr
OLD - Interior, Exterior, Electrical, & Misc.
30
Mar 16, 2010 07:38 PM
Njc0013
Interior Semi-Tech
0
Feb 3, 2010 11:29 AM
MyYellowRanger
Interior Semi-Tech
11
Jun 15, 2004 01:51 PM
