Knobs, Aluminum, Heater/AC/Headlights/4x4 Sw's.
#1
*****, Aluminum, Heater/AC/Headlights/4x4 Sw's.
The ***** from the Stage3 arrived and slide on the Heater/AC positions with out a problem.
Here are the Heater/AC ***** and the "4x4" Sw **** in place.
Here is the Headlight ****.
The Headlight **** only needed the metal clip in the mounting hole adjusted to align the Pointer.
The 4x4 **** needed to align the spring clip and had to have a little metal removed from the center shaft area on back to make it fit.
So the point here is that the Mustang '04 ***** can be adapted to the Ranger Dash.
We all knew that they would fit the Heater and A/C but with a little work they will fit the other two location.
Next step will be paint them black but leave the knurling as bare aluminum.
Maybe turn the indicators red, not sure on that right now; I guess I will leave the indicators green until I change the dash lights..
Here are the Heater/AC ***** and the "4x4" Sw **** in place.
Here is the Headlight ****.
The Headlight **** only needed the metal clip in the mounting hole adjusted to align the Pointer.
The 4x4 **** needed to align the spring clip and had to have a little metal removed from the center shaft area on back to make it fit.
So the point here is that the Mustang '04 ***** can be adapted to the Ranger Dash.
We all knew that they would fit the Heater and A/C but with a little work they will fit the other two location.
Next step will be paint them black but leave the knurling as bare aluminum.
Maybe turn the indicators red, not sure on that right now; I guess I will leave the indicators green until I change the dash lights..
Last edited by Scrambler82; 11-09-2009 at 01:17 PM. Reason: spell chk
#4
#6
Thread
Thread Starter
Forum
Replies
Last Post
The_Dealer
2.3L & 2.5L I4 Tech
2
11-01-2007 02:44 PM