Hello from Canadaland
Thread Starter
|
Member
Joined: Aug 2011
Posts: 11
Likes: 0
From: Regina
Hello from Canadaland
Hey everyone, just a new member here, trying to soak up as much info as possible.
I just bought a new 2011 Oxford white FX4 4X4 auto. Will post some pics up soon enough
This is our 3rd vehicle, I will probably do a slight lift and some 285/75/16s, some hids and keep it clean.
I just bought a new 2011 Oxford white FX4 4X4 auto. Will post some pics up soon enough
This is our 3rd vehicle, I will probably do a slight lift and some 285/75/16s, some hids and keep it clean.
Thread Starter
|
Member
Joined: Aug 2011
Posts: 11
Likes: 0
From: Regina
Nice Im just trying to decide on the lift I wan to do.
Im thinking I may just do the tortion bar crank, and maybe a small block in the back.
I want to run a 15 x 8 or 10 .... or a 16 x 8 .. I want the wheels to fit flush to the fender.
Im not too sure what the backspacing I will need.
hah
Im thinking I may just do the tortion bar crank, and maybe a small block in the back.
I want to run a 15 x 8 or 10 .... or a 16 x 8 .. I want the wheels to fit flush to the fender.
Im not too sure what the backspacing I will need.
hah
Thread Starter
|
Member
Joined: Aug 2011
Posts: 11
Likes: 0
From: Regina
So I have been reading like mad, just have a few questions if anyone can help that would be great.
Im going to run a 285 75 16 tire on a 16 x 8 wheel.
As far as the lift goes, I will just be doing the prekey or cranked tortion bars on the front.
Now on the rear, I would like to lift it slightly.. Are the stock blocks a 1.5" ?
If I ditched the 1.5" block and put the 3" block would it have a decent stance or would it be 80s drag race truck?
Would a 2" block be a better choice? I have read not too stack blocks, I find it funny because the dealership here has a 2011 with blocks stacked.
would it be okay to run a 2" block stacked ontop of the 1.5" or just get a 3" block and run it by itself
Im going to run a 285 75 16 tire on a 16 x 8 wheel.
As far as the lift goes, I will just be doing the prekey or cranked tortion bars on the front.
Now on the rear, I would like to lift it slightly.. Are the stock blocks a 1.5" ?
If I ditched the 1.5" block and put the 3" block would it have a decent stance or would it be 80s drag race truck?
Would a 2" block be a better choice? I have read not too stack blocks, I find it funny because the dealership here has a 2011 with blocks stacked.
would it be okay to run a 2" block stacked ontop of the 1.5" or just get a 3" block and run it by itself
Thread Starter
|
Member
Joined: Aug 2011
Posts: 11
Likes: 0
From: Regina
Well I got the prekey mod done, and belltech shackles on the rear. I have some rancho rs5374 front shocks on order, as I am topping out a bit over big bumps. Wheels are xdbully123 and tires are 285-75-16 duratracs heres a quick pic.
also have 3000k fog lights, figured out I cant run hid in the ranger headlights....
also have 3000k fog lights, figured out I cant run hid in the ranger headlights....
Thread
Thread Starter
Forum
Replies
Last Post
RangerXLT85
General Ford Ranger Discussion
14
Sep 1, 2005 08:12 PM
Drew1287
General Ford Ranger Discussion
8
Aug 9, 2005 08:10 PM
