1994 ranger full rear wheel well liners
#1
1994 ranger full rear wheel well liners
new member looking for some good help trying to find rear wheel well liners....i saw a post by andre (copied below) where he used liners from a dodge ram...i would like to revive that discussion and find out more info on the success of andre's ram liners or what else works...any info would be appreciated
05-05-2010 #1
Andre
Stage I Member
I am: andre fergusen
Join Date: Apr 2010
Location: waterloo, ont
Feedback: 0 / 0%
Posts: 7 Production rear wheel well liners for Ford Ranger
--------------------------------------------------------------------------------
Hello everyone,
I bought a 2007 Ranger 2.3L standard and have found a set of Dodge rear wheel well inserts that happen to fit the truck. I wasted over a day trying to make a set, and as much time taking exacting measurements which made me realize the production inserts would be a close fit. They are a perfect fit as you can see in the two attached photos.
The order number is "82207367AB Liner Kit" for a Dodge Ram. I paid CDN$114 for the pair, plus tax.
You still need to figure out how to mount them. I support them vertically using a custom welded bracket with stainless steel bolt.At either end I use zip ties to truck struts. To remove the wheel well I cut two zip ties and undo one stainless self locking nut. In this way I made no modifications, not even a drill hole, to the truck.
I had to trim the insert in one spot where it might rub against the axle U bolt.
The Ranger, as is, is designed to allow the box to rot from salt, slush and sand I see in winter and I love to beat the system. I joined mainly just to alert others to my discovery.
All the best,
Andre.
05-05-2010 #1
Andre
Stage I Member
I am: andre fergusen
Join Date: Apr 2010
Location: waterloo, ont
Feedback: 0 / 0%
Posts: 7 Production rear wheel well liners for Ford Ranger
--------------------------------------------------------------------------------
Hello everyone,
I bought a 2007 Ranger 2.3L standard and have found a set of Dodge rear wheel well inserts that happen to fit the truck. I wasted over a day trying to make a set, and as much time taking exacting measurements which made me realize the production inserts would be a close fit. They are a perfect fit as you can see in the two attached photos.
The order number is "82207367AB Liner Kit" for a Dodge Ram. I paid CDN$114 for the pair, plus tax.
You still need to figure out how to mount them. I support them vertically using a custom welded bracket with stainless steel bolt.At either end I use zip ties to truck struts. To remove the wheel well I cut two zip ties and undo one stainless self locking nut. In this way I made no modifications, not even a drill hole, to the truck.
I had to trim the insert in one spot where it might rub against the axle U bolt.
The Ranger, as is, is designed to allow the box to rot from salt, slush and sand I see in winter and I love to beat the system. I joined mainly just to alert others to my discovery.
All the best,
Andre.
Thread
Thread Starter
Forum
Replies
Last Post
nantestom
General Ford Ranger Discussion
2
05-18-2011 08:55 PM
wildswing
General Technical & Electrical
21
07-21-2009 04:13 PM