Lowering ideas
#1
#3
i wanted to do the same thing without spending a lot of $, I lowered mine about 1.5in. using 10,000 pound straps what i did was put Wight in the back till it was about 2in. lower on each side and strapped the leaf spring to the frame and took the Wight out and it was 1.5in. lower..... it makes the ride a little stiffer but not too stiff, it reduced body roll and u can always take them off.
#5
i wanted to do the same thing without spending a lot of $, I lowered mine about 1.5in. using 10,000 pound straps what i did was put Wight in the back till it was about 2in. lower on each side and strapped the leaf spring to the frame and took the Wight out and it was 1.5in. lower..... it makes the ride a little stiffer but not too stiff, it reduced body roll and u can always take them off.
to drop it that much, the right way is to grind the rivets on the hangers, flip the hangers,a nd bolt the hangers back in using 3/8X1" grade 8 bolts
#6
i flipped the hangers saturday and it ended up lowering it about 3 inches and the truck is now even but the truck looks as if it is tipping up because the 08 fender wells are bigger than the 95s so now im going to lower the front to give it that angled look where can a find a cheap set of lowering springs for the front because i really dont want to pull a no no and heat up or cut the stock springs.
Thread
Thread Starter
Forum
Replies
Last Post