For Sale: 3.0 Underdog Pulley/Belt and Roller Rockers - NC
Thread Starter
|
Member
Joined: May 2006
Posts: 298
Likes: 0
From: Raleigh, NC
3.0 Underdog Pulley/Belt and Roller Rockers - NC
As some of you may know I recently had a remanufactured engine put in which is warrantied for 3 years/100k miles. For risk of them not honoring it (and these have been laying around for a while) I have decided it was time to sell.
First there is a blue Underdog Performance underdrive crank pulley with Gatorback belt. Some of you probably remember when underdogperformance.com was still up and how popular these were. It took me a while to find a used one. Based on my internet research, I believe the belt to be the correct size for the 3.0 with AC. The pulley is a 4 bolt. Looking for $125 shipped to the lower 48.
Second is a set of 1.7 Roller Rockers. These are NOT the ones Tom Morana sells. I picked this up from N20-3.0 here on the forum. If I remember right, the rockers are the same ones Morana uses but the pedestal mounts are different. Looking for $225 shipped to the lower 48.
First there is a blue Underdog Performance underdrive crank pulley with Gatorback belt. Some of you probably remember when underdogperformance.com was still up and how popular these were. It took me a while to find a used one. Based on my internet research, I believe the belt to be the correct size for the 3.0 with AC. The pulley is a 4 bolt. Looking for $125 shipped to the lower 48.
Second is a set of 1.7 Roller Rockers. These are NOT the ones Tom Morana sells. I picked this up from N20-3.0 here on the forum. If I remember right, the rockers are the same ones Morana uses but the pedestal mounts are different. Looking for $225 shipped to the lower 48.
Member
Joined: May 2014
Posts: 6
Likes: 0
From: Oshawa
As some of you may know I recently had a remanufactured engine put in which is warrantied for 3 years/100k miles. For risk of them not honoring it (and these have been laying around for a while) I have decided it was time to sell.
First there is a blue Underdog Performance underdrive crank pulley with Gatorback belt. Some of you probably remember when underdogperformance.com was still up and how popular these were. It took me a while to find a used one. Based on my internet research, I believe the belt to be the correct size for the 3.0 with AC. The pulley is a 4 bolt. Looking for $125 shipped to the lower 48.
Second is a set of 1.7 Roller Rockers. These are NOT the ones Tom Morana sells. I picked this up from N20-3.0 here on the forum. If I remember right, the rockers are the same ones Morana uses but the pedestal mounts are different. Looking for $225 shipped to the lower 48.
First there is a blue Underdog Performance underdrive crank pulley with Gatorback belt. Some of you probably remember when underdogperformance.com was still up and how popular these were. It took me a while to find a used one. Based on my internet research, I believe the belt to be the correct size for the 3.0 with AC. The pulley is a 4 bolt. Looking for $125 shipped to the lower 48.
Second is a set of 1.7 Roller Rockers. These are NOT the ones Tom Morana sells. I picked this up from N20-3.0 here on the forum. If I remember right, the rockers are the same ones Morana uses but the pedestal mounts are different. Looking for $225 shipped to the lower 48.
Last edited by justcaring; Jun 30, 2014 at 02:26 PM. Reason: Should have been a PM
Thread
Thread Starter
Forum
Replies
Last Post
Jwad00
2.9L & 3.0L V6 Tech
23
Oct 6, 2009 12:59 PM
Vee6 3.0
OLD - Engine & Drivetrain
3
May 21, 2009 07:55 AM
