Roller rockers
RF Veteran
Joined: Jun 2004
Posts: 10,623
Likes: 6
From: Kennett Square, PA
We have vendors here which sell what you need I believe. Look in our Vendors section and follow some links.
You need to get the right ones to make sure they don't run into interference issues with the valve cover and so forth.
You need to get the right ones to make sure they don't run into interference issues with the valve cover and so forth.
Member
Joined: Jul 2006
Posts: 199
Likes: 1
From: Tejas!
http://stuffforyourranger.com
Not for the casual wrench turner. If you can change your own oil - but little else, these might not be for you. Consult a mechanic.
If you can rebuild an engine, you're the right person for the job.
Not for the casual wrench turner. If you can change your own oil - but little else, these might not be for you. Consult a mechanic.
If you can rebuild an engine, you're the right person for the job.
Thread Starter
|
Member
Joined: Dec 2007
Posts: 48
Likes: 0
From: marin, ca
Originally Posted by Fredness
http://stuffforyourranger.com
Not for the casual wrench turner. If you can change your own oil - but little else, these might not be for you. Consult a mechanic.
If you can rebuild an engine, you're the right person for the job.
Not for the casual wrench turner. If you can change your own oil - but little else, these might not be for you. Consult a mechanic.
If you can rebuild an engine, you're the right person for the job.
Member
Joined: Jul 2006
Posts: 199
Likes: 1
From: Tejas!
Because:
I modified a set of 1.72's for my 3.0L in 2000 for testing.
After 10,000 miles and 5 installs, I found a better way to do that and have been marketing/distributing them since 2003.
To date I've installed over a dozen sets.
I modified a set of 1.72's for my 3.0L in 2000 for testing.
After 10,000 miles and 5 installs, I found a better way to do that and have been marketing/distributing them since 2003.
To date I've installed over a dozen sets.
Member
Joined: May 2005
Posts: 1,046
Likes: 2
From: San Diego, CA
Originally Posted by 2000ranger4x4
Ya I can definetly do it myself, I just wouldnt know how to adjust the valve lash! Would this be a good upgrade for a 3.0 or what?
i used the kit that boss on rps put together for my 1.7 rocker upgrade. he includes detailed instructions on setting the valve lash. not even an issue!
RF Veteran
Joined: Jun 2004
Posts: 10,623
Likes: 6
From: Kennett Square, PA
Originally Posted by 2000ranger4x4
UM what?? lol not catching on, what did you do to modify them and how are you marketing them, how much!!
Member
Joined: Jul 2006
Posts: 199
Likes: 1
From: Tejas!
Originally Posted by 2000ranger4x4
UM what?? lol not catching on, what did you do to modify them and how are you marketing them, how much!!
Thread Starter
|
Member
Joined: Dec 2007
Posts: 48
Likes: 0
From: marin, ca
LMAO YOUR Fred!! read about you in a few posts! Good to meet you. Those are the exact rockers I was looking at getting! Before I can order them though, I have a misfire on my #4 cylinder that I need to diagnose. Please check out my other post about this and HELP!! lol
Now Im not so sure if I have stuck lifter or a valve problem. How can you tell what that ticking noise is coming from, lifter or valve???
Now Im not so sure if I have stuck lifter or a valve problem. How can you tell what that ticking noise is coming from, lifter or valve???
Thread
Thread Starter
Forum
Replies
Last Post
