Dana60, 5.4L DOHC, 4r100
#1077
#1081
#1082
#1084
well my driveshaft flange didnt ship until today, but this 4 day weekend id like to finish up several things. I also want to put in an order to Ford for a few other items. Next week its going on the scale so I can get the right spring rates and recharge the nitrogen in the shocks. I cant wait for it to finally sit at the right height!
#1086
ordered the front driveshaft off ebay. another 04-10 Superduty Front shaft.
I also ordered the rear springs 150 tender and 200 mains. Hopefully that lowers it down though I am a bit concerned because I mis measured the amount of droop i wanted in the shocks. all well, if it doesnt work I will just switch a few things around for now and it will be fine.
The truck leaves for Nicks on the 17th! Last trip!
I also ordered the rear springs 150 tender and 200 mains. Hopefully that lowers it down though I am a bit concerned because I mis measured the amount of droop i wanted in the shocks. all well, if it doesnt work I will just switch a few things around for now and it will be fine.
The truck leaves for Nicks on the 17th! Last trip!
#1089
#1094
most are probably tired of the small updates but in 1 week it will be back at NicksterSVTs shop and finally getting the last things it needs to run. Then it will be debug time. I will get some newer pictures this week.
Driveshafts will be done Monday or Tuesday, the rear shocks are charged, new King Springs are installed, it is sitting close to level. Finished mounting the radiator, got radiator hoses on, worked on my shifters some, dialed in my rear links (had some play), also ordered 1350 yokes for the Dana 60s and front output on the 205. Hoping to get all that done by Thursday.
here is one picture of the truck. I was just messing around with the high lift. ignore the messy shop. lol
Driveshafts will be done Monday or Tuesday, the rear shocks are charged, new King Springs are installed, it is sitting close to level. Finished mounting the radiator, got radiator hoses on, worked on my shifters some, dialed in my rear links (had some play), also ordered 1350 yokes for the Dana 60s and front output on the 205. Hoping to get all that done by Thursday.
here is one picture of the truck. I was just messing around with the high lift. ignore the messy shop. lol