Just some normal pics - Ranger-Forums - The Ultimate Ford Ranger Resource


Snapshots Share photos of vehicles in this sub-forum.

Reply
 
LinkBack Thread Tools Search this Thread
  #1  
Old 06-20-2008
cereal83's Avatar
Member
Thread Starter
 
Join Date: Feb 2008
Location: Ontario, Canada
Posts: 217
Just some normal pics

Hey all,

Well I haven't been around much due to my new job but I still have the truck and it's still going strong. I have been saving for a suspension lift, wheels/tires and maybe some video in the truck. I should be ordering everything by next Friday if all goes well.

Well here are some pics of the current state of it

Just the truck a little over 3 months of having it



Inside the truck



The system as is right now (going to be making it look alot better, it was just a quick put together)



GPS and my deck and



Deck



Amp




Amp and sub pic





Sub (going to be making a custom box for here so it looks decent. lol)





Kicker L5




Nothing special




Antenna for the XM and Sirus




Tint and antennas



Lastey,

My exhaust which is nothing special



So there is not anything special about it but I love it and I am working to make it better!

Thanks
Reply With Quote
  #2  
Old 06-20-2008
Roach2004's Avatar
RF Veteran
iTrader: (3)
 
Join Date: May 2005
Location: Houston, TX
Posts: 8,320
Good looking truck cant wait to see her lifted!
Reply With Quote
  #3  
Old 06-20-2008
Mykhael's Avatar
Member
iTrader: (3)
 
Join Date: Sep 2004
Location: .
Posts: 4,197
Nice truck will look good lifted

why 2 antenna for the xm and sirus
Reply With Quote
  #4  
Old 06-20-2008
Seahawk's Avatar
Member
 
Join Date: Mar 2008
Location: Sheboygan County, WI
Posts: 376
wow nice looking truck!!!want to get rid of it??lol
Reply With Quote
  #5  
Old 06-20-2008
cereal83's Avatar
Member
Thread Starter
 
Join Date: Feb 2008
Location: Ontario, Canada
Posts: 217
I can't wait until it's lifted either. I have been dying to have it done and I just about have the money to do it now. I say within 2 weeks, it will be up on a RCD lift.

I have 2 antennas because sirus wasn't good enough for me and came from the factory. I much rather prefer XM so I got that also, got some type of Panasonic switching unit behind my deck so now I have both XM and Sirus. 99% of the time, I am on XM.

Thanks for your comments
Reply With Quote
  #6  
Old 06-20-2008
Roddy's Avatar
Member
 
Join Date: Mar 2008
Location: Canada
Posts: 1,332
Looks good, but wtf is up with your exhaust?
Reply With Quote
  #7  
Old 06-20-2008
t3ob's Avatar
Member
 
Join Date: Apr 2008
Location: Olive Branch, MS
Posts: 1,762
nice man
Reply With Quote
  #8  
Old 06-20-2008
english15x's Avatar
Member
 
Join Date: Jun 2008
Location: Butler, PA
Posts: 108
looks good but your inside would drive me nuts if it was me. I love no cords hanging around and a clean dash.
Reply With Quote
  #9  
Old 06-20-2008
gatorblue92's Avatar
RF Veteran
 
Join Date: Jun 2004
Location: Delaware
Posts: 8,238
nice truck
Reply With Quote
  #10  
Old 06-20-2008
mossyoak1992's Avatar
Member
 
Join Date: Jan 2008
Location: Bridgeton, N.J.
Posts: 383
nice looking truck
Reply With Quote
  #11  
Old 06-20-2008
Rangerguy's Avatar
Member
 
Join Date: Feb 2008
Location: California
Posts: 1,120
Looking good man!
Reply With Quote
  #12  
Old 06-20-2008
Melt's Avatar
Member
iTrader: (1)
 
Join Date: Apr 2008
Location: Denver, CO
Posts: 3,392
good to see some more mazdas on here
Reply With Quote
  #13  
Old 06-20-2008
TrucksGetDirty's Avatar
Member
iTrader: (1)
 
Join Date: Jun 2008
Location: Florida
Posts: 947
Mazda, FTMFW!
Reply With Quote
  #14  
Old 06-20-2008
Machine090767's Avatar
RF Veteran
 
Join Date: May 2006
Location: Minnesota
Posts: 6,410
remember, like the ranger, mazda b series ends it run in 2009.
Reply With Quote
  #15  
Old 06-20-2008
rangerboy101's Avatar
RF Veteran
iTrader: (5)
 
Join Date: Aug 2007
Location: Winchester, Va
Posts: 8,187
lookin good. since your on xm almost all the time why dont you just get rid of the sirius antenna? cant wait to see it all lifted.
Reply With Quote
  #16  
Old 06-20-2008
04blackedge's Avatar
RF Veteran
iTrader: (13)
 
Join Date: Jan 2007
Location: Durham, NC
Posts: 23,426
You need to work on your install skills, it would look so much better if you tidied all your working up.
Reply With Quote
  #17  
Old 06-20-2008
08XLT4x4's Avatar
Member
iTrader: (7)
 
Join Date: Mar 2008
Location: bomba shack
Posts: 3,257
Quote:
Originally Posted by 04blackedge View Post
You need to work on your install skills, it would look so much better if you tidied all your working up.
i was gonna say that, i hate how people just throw a wood box on the back floor and call it a system. i guess its cheap/easy.

nice truck through! lift her!
Reply With Quote
  #18  
Old 06-21-2008
cereal83's Avatar
Member
Thread Starter
 
Join Date: Feb 2008
Location: Ontario, Canada
Posts: 217
Hey all,

First off, Yes the install is messy but I just wanted to get it in there and installed. I will be working on a proper box for the back as well as amp holder. As you can see, there is lots of slack on the cables so I can move the amp around. I know it looks bad but it will be fixed after the lift kit is installed.


I also hate wires hanging around everywhere but I don't know of another way to power the gps unless I charge it every night and then just let it run on batteries during the day.

Umm what do you mean wtf is up with my exhaust? Look stupid to you? Bent? dirty? lol I dunno what you mean.
Reply With Quote
  #19  
Old 06-21-2008
Trigger01's Avatar
RF Veteran
iTrader: (2)
 
Join Date: Oct 2005
Location: Knoxville, TN
Posts: 18,788
Looks good, but I'd definitely clean up the wires. The one for the GPS would drive me nuts.
Reply With Quote
  #20  
Old 06-21-2008
RangerMuse's Avatar
Member
 
Join Date: Jul 2007
Location: Colorado
Posts: 1,727
Cant wait to see it lifted but like everyone else is mentioning take a day and get all the wires cleaned up you will like everything a lot better
Reply With Quote
  #21  
Old 06-21-2008
schatten789's Avatar
Member
 
Join Date: Feb 2007
Location: Matagorda County, Texas
Posts: 735
We got the same amp, sub, and I think box. For the box I built a platform for it to set on so that I could set my seat how I wanted.

The screws are temp. until I find a better way to keep it from sliding but still removable.



Dont mean to thread jack, just showing you an idea. Im 6ft 1in and I sit comfortably with the box like that behind the drivers seat.
Reply With Quote
  #22  
Old 06-22-2008
cereal83's Avatar
Member
Thread Starter
 
Join Date: Feb 2008
Location: Ontario, Canada
Posts: 217
Oh man thanks for the pics. That's exactly what I was thinking of doing.

Well I also have some bad news, the truck was stolen last night so everything is on hold for now. Went to a bar parked, came out around 1:30 and nothing!
Reply With Quote
  #23  
Old 06-22-2008
Roddy's Avatar
Member
 
Join Date: Mar 2008
Location: Canada
Posts: 1,332
Quote:
Originally Posted by cereal83 View Post

Umm what do you mean wtf is up with my exhaust? Look stupid to you? Bent? dirty? lol I dunno what you mean.

Ya i dont want to sound like a J.A but you've got a nice truck and a crappy looking exhaust... who came up with the idea to mount it like that???

At first i thought it was bent from off roading...., why not 90 it like factory with a nice tip on the end?
Reply With Quote
  #24  
Old 06-22-2008
schatten789's Avatar
Member
 
Join Date: Feb 2007
Location: Matagorda County, Texas
Posts: 735
Quote:
Originally Posted by cereal83 View Post
Oh man thanks for the pics. That's exactly what I was thinking of doing.

Well I also have some bad news, the truck was stolen last night so everything is on hold for now. Went to a bar parked, came out around 1:30 and nothing!
Yea I just saw the thread of how it was recovered, sorry about the loss.
Reply With Quote
  #25  
Old 06-22-2008
thesoundmaster's Avatar
Member
 
Join Date: Mar 2007
Location: Centennial CO
Posts: 5
That just makes me sick. That was a damn good looking truck. Make the bastards pay when they catch em, if they catch em.
Reply With Quote
Reply

Related Topics
Thread Thread Starter Forum Replies Last Post
Just got a OBDII scanner, what are normal settings for ex. fuel trim, intake pressure mhue General Technical & Electrical 3 02-17-2015 12:04 PM
Some Camburg, some BTF, some Bilstein, some OEM yeatzee Snapshots 17 08-14-2012 05:17 PM
is this normal? (pics inside) red_neck_3 Suspension Tech 11 03-01-2006 05:44 AM
Using the 4x4 switch as a 3-position 'normal' switch... Swoop1156 General Technical & Electrical 16 12-19-2005 09:42 PM
Does this look normal or abnormal for a chop? aftermarket New Ideas 7 10-12-2004 03:05 PM


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off



All times are GMT -6. The time now is 07:33 AM.


We are a participant in the Amazon Services LLC Associates Program, an affiliate advertising program designed to provide a means for us to earn fees by linking to Amazon.com and affiliated sites.