Comunistico´s diesel SAS d44
 

well... finally getting my truck with a SFA.

im not doing the work, id rather have a guy do it for me. (also my dad "advice" to do so)

so plans so far id like to have the truck with coils, though ive seen his 2 trucks hes sas´ed and both are with leafs, and are BA trucks so whatever he tells me.

got a dana 44 wagoneer i got from a friend with everything minus the calipers and carrier and gears, but ill probably leave it with an open dif. for the time. for 500$

im going tomarrow to talk everything and see if i can get the truck in the shop this year he tells me he takes 2 weeks to do the swap so.. hopefully for new3year ill have a truck, even without 4wd but with the axle under running.. but i doubt it..

here are a few pics of both his trucks (hes already sponsored by maxxis.. if u dont notice btw..)
http://sphotos.ak.fbcdn.net/hphotos-..._6285193_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._2477584_n.jpg

his first sased truck..
http://sphotos.ak.fbcdn.net/hphotos-..._4913294_n.jpg
http://sphotos.ak.fbcdn.net/hphotos-..._7561781_n.jpg

im pretty sure hell make a hell of a job, plus hes charging me pretty nice i belive. around 1000$ for the swap plus the parts of course...

getting pics of the axle in this days hopefully


im probably not going over 35s cause what id like is for the truck to flex alot, and sit as low as possible, also im adding a snorkel and flares. but 1 step at a time.

pics of my truck for the "before" pic

http://sphotos.ak.fbcdn.net/hphotos-..._6957817_n.jpg
truck was overheating...

http://sphotos.ak.fbcdn.net/hphotos-..._1827542_n.jpg

and forgot, now after the sas im really starting with the exo.. lol

Can't wait to see it!

Thumbs up for SAS'ed Rangers outside America!
Here is mine, straight from Brazil.

thanks. need more pics of that truck! ^^

Only $1,000? Sounds like a good deal to me

Do you have a D44 as a rear axle, too? It's gonna be one awesome truck, man.

yeah hes charging pretty cheap and does a hell of a job. ive seen him running jis truck at the 4x4 challenges and they hold up great.

yeah ive got rear d44.

im sticking with 4.56 gears as i just regeared... so im not waisting my rear gears atleast... and i dont plan on going over 35s .. atleast for now. i just want it to flex decently and with 35s i think ill do ok as i dont want it very tall

also forgot to mention im getting my rear locker next week i hope also. its the e-locker. i didnt want to mess around with the air lines and compresor etc.

Awesome man!!! Can't wait to see a 4-door SAS'd!! Plus it looks like you're actually gonna use it...heck ya!

Heck yea. A 2.8 sas ftw

hell yeah keep us updated

Man, you said you're going with 35s? What do you have now? 32's?

ive got 285-75-16s although im keeping this untill i either sell them or need to change them. i want 35s (dont want to regear again) this guy as he is sponsored by maxxis they gave him a set of 4 maxxis creepy crawler 35s on 16s..... and i belive i can get him to sel em for 500$ new. and try and sell my tires...

im going tommarrow to check the d44 and see whats missing with the mechanic.

what we talked today was to get the trucked stripped and then decide which route to go, if springs or leafs ( no coilovers..) .

remember my trucks not gona bee rock crawling what we have here is trails, mud, muddy trails, and pongs called "roads". so the main idea of the sas is to make the truck "bullet proof" .. i know 1 ton axles.. but im not going over 35s with this truck, prolly most 36 as i do not plan on regearing again....

and hell yeah im gona use the truck for what its built for! thats why everything on the ifs right now is borken, changed or craked just to the point of busting!

siiiiiiiiiiiiiiiiick.

guess your gunna have my dream truck soon lol

already settled truck going in for the shop first week of january, to start off 2011 with the right foot.

i belive trucks gona sit around 3 or 4" higher than it sits now... i hope not much more. ading 2" spacers al around and some flares and done.

il get pics of the axle today when i get to see it

ohboyohboyohboyohboyohboyohboyohboyohboyohboyohboy

axle is in the shop already. gotta go find the calipers that might be around 100$ for both of them

a friend got a steering box out of a chevy originaly moving a dana 60 so if we can fit it well use that one ( "free" ), or go look for a yotas steering box that i can get for around.. 140$...

really thinking bout leafs, for toughness mainly as truck gona do some serious trails and heavy mud so i dont need "that much" articulation

theres a guy near here that ppl say hes got the carrier and 4.56 gears for the dana 44 that i might be able to get for 200$ so gotta go check what conditions it is.

im redrilling rear axle for 6 lug pattern and my wheels im talking to another friend that sells used wheels to find me some nice 16x8 black wheels and trade em im.

in the night ill upload a pic of the axle (gotta paint it.. its orange right now.......)

I hate you.

was checking another local 4x4 forum and found a video they edited of a trip they made to "Boca San Carlos" in costa rica thats gona be my gol trip to make after the sas.

i already knew it was a great 1 unique trip, but after this video i NEED to go there!

http://gringo-loco.smugmug.com/Movie...122_5rkDD-L-LB

this is why im probably going with leafs up front. much stronger components for the type of wheeling i want to do with my truck

Why were they trying to move the rock? lol...

me too

i cant watch the video......


but this is going to be sick.

Neither could I, until I tried Explorer 7... it doesn't work on Chrome

lost the link.. damn was a nice vid. heres some pics of that trip of the video

Foro Asociacin 4X4 Extremo Costa Rica :: Reuniones y Paseos Oficiales :: Ride Modificados Boca San Carlos 26/01/2008 ~ Runboard

thats one of the many places i wanna go

Gringo Loco Productions - Gringo-Loco's Photos | SmugMug

there now it works the video! ...