Hello everyone new here. Anyway I have a 2011 Ranger XLT Ext. cab with 4.0L and trailer towing package. It has only 29,000 miles on it. I have been setting it up recently with a weight distribution hitch to pull a camper. While setting it up I did all the measurements at the fender wells for the height of the truck before and after the camper connected. Anyway the drivers side front and rear is about 5/8" lower than the passenger side without the camper connected. Is this common or is there something wrong? This truck has never had much weight in the bed. It hasn't pulled the camper yet. All it has pulled has been a pop up camper and a 6x10 enclosed trailer with bags of mulch in it.
Thanks much

 

Google ranger lean. Everything is on the driver side, gas tank, battery, you. It’s common.

 

+1 ^^^

Not at all an uncommon issue on Rangers, several ways to correct it, as said do a search and look at several fixes to decide what fits your needs

 

I have a 2011 extra cab 2 w/d that does the exact same thing.

 

130 lbs Fuel
180 lbs driver
40 lbs battery

350 lbs total on divers side

You need a 350 lb girlfriend to sit in the passenger seat