hey guys, i bought my coil springs and shocks today, and i was wondering if you guys have any advice for me, is it hard to do? by the way this will be the first time ive ever done coil springs

 

Are you lifting it or lowering it?

 

Jackstands,jackstands,jackstands.
Don't go under without 'em.

 

right now its lowered in the front end and im raising it back up.

 

Agreed. Use jackstands. Also use a coil compressor tool and be careful.

 

Pssh.

Jack it up, support the frame on jackstands.

Unbolt the sway bar, unbolt the shocks, unbolt the spring bucket, the coil will fall out when you lower the axle do that on each side. If its tricky to get back in, stand on the hub.