Bent Torsion Bar? 2002 3.0 V6 Ranger
#26
02-29-2008
Quote:
the truck only sits on my Spindle Lift.
I take it you've lifted the truck in the past.How did you lift the rear and have you checked the rear spring U bolts to make sure they're tight ?
I'm thinking left turn , right rear tire 'chucking' back and forth if the leaf springs are loose to the axle.
With an open diff ,the wheel on the outside of the turn is the drive wheel.
the truck only sits on my Spindle Lift.
I take it you've lifted the truck in the past.How did you lift the rear and have you checked the rear spring U bolts to make sure they're tight ?
I'm thinking left turn , right rear tire 'chucking' back and forth if the leaf springs are loose to the axle.
With an open diff ,the wheel on the outside of the turn is the drive wheel.
#27
02-29-2008
Quote:
the truck only sits on my Spindle Lift.
I take it you've lifted the truck in the past.How did you lift the rear and have you checked the rear spring U bolts to make sure they're tight ?
I'm thinking left turn , right rear tire 'chucking' back and forth if the leaf springs are loose to the axle.
With an open diff ,the wheel on the outside of the turn is the drive wheel.
the truck only sits on my Spindle Lift.
I take it you've lifted the truck in the past.How did you lift the rear and have you checked the rear spring U bolts to make sure they're tight ?
I'm thinking left turn , right rear tire 'chucking' back and forth if the leaf springs are loose to the axle.
With an open diff ,the wheel on the outside of the turn is the drive wheel.
Thread
Thread Starter
Forum
Replies
Last Post
01RangerEdge
OLD - Suspension, Tires, & Wheels
7
01-10-2013 05:01 AM
RangerNVS
OLD - Suspension, Tires, & Wheels
26
01-22-2010 10:28 AM
