I have the coilover brackets all made except for the tabs welded to the lower control arm bracket. Does anyone know the exact location to weld them to the lower control arm bracket? In addition, does anyone know the exact location of the holes and exactly where the lower control arm bracket gets mounted to the lower control arm?
thanks

 

Your first questions should be answered in the latest coil-over thread. As for the last, you will use two existing shock mount holes. You will drill two more. So it will be self explanatory once you have the correct hole placement.

 

Are there any drawings or pictures that show the exact location of The holes on the brackets, I still have have to drill all of the holes into the brackets

 

Here's the best that is out there so far:

Coil-Over Bracket Info.

and



It would probably be best to drill them as you go. That way you are sure you get them in the right place.